Latest revision as of 10:54, 4 April 2016

Problem[edit]

Sometimes OptFlux performance may slow down after several operations, e.g optimizations.
This slow down can be avoided by changing a parameter in the OptFlux configuration and allowing the application to use more resources from the machine.

• Currently OptFlux is using 1Gb of your machine memory. You can increase to 2Gb by replacing a single file by this one -> MoreMemoryFix.zip.

• If you have a 32bit machine we do not advise this procedure.

• 

  Extract the main.conf file and copy it.

• 

  Go to the OptFlux folder in your machine and paste this main.conf file to the conf folder.
  The system will ask to replace the file.

Manual change[edit]

You can also manually change how much memory you want to allow OptFlux to use.
This can be done by changing a property in the main.conf file.

• Open the main.conf file with NotePad or another text editor.

• Find the -Xmx text and replace 1024m by the desired value.
  

Possible values:

• 2048m (2 Gigabytes)
• 2g (2 Gigabytes)
• 3g (3 Gigabytes)
• 4g (4 Gigabytes)