Latest revision |
Your text |
Line 3: |
Line 3: |
| In this section the MFA4Optflux How-to is described. | | In this section the MFA4Optflux How-to is described. |
| | | |
− | Assuming the pseudo-steady state hypothesis we have
| |
− |
| |
− | A*v = 0, where A is the stoichiometric matrix and v is the flux matrix
| |
− | Ac*Vc+Am*Vm = 0, where the subfix "m" represents measured fluxes matrices
| |
− | and the subfix "c" is related with the fluxes that are going to be calculated.
| |
− |
| |
− | The following set of methods is available in the public version of the plug-in:
| |
− |
| |
− | * If the rank of the model stoichiometric matrix (Ac) < unknown rates the system is under-determined.
| |
− | ** Available Methods:
| |
− | * Flux Balance Analysis;
| |
− | <!-- * Null Space Method; -->
| |
− | * Tight Bounds Calculation.
| |
− | * If the rank of the model stoichiometric matrix (Ac) == unknown rates the system is determined.
| |
− | There are no no linear dependencies between the rows.
| |
− | ** Available Methods:
| |
− | <!-- * Null Space Method; -->
| |
− | * The Vc is calculated by the following expression: Vc = -(Ac^-1)*Am*Vm
| |
− | * If the rank of the model stoichiometric matrix (Ac) < number of metabolites the system is over-determined.
| |
− | Some rows of the stoichiometric matrix are linear dependent.
| |
− | ** Available Methods:
| |
− | * Least squares estimate
| |
− | <!-- * Null Space Method; -->
| |
| === First step === | | === First step === |
| | | |
Line 34: |
Line 11: |
| | | |
| [[Image:MFAloadProject1.png]] | | [[Image:MFAloadProject1.png]] |
− |
| |
− | After name the project and load the [[Media:MFAmetatool.txt]] model.
| |
| | | |
| [[Image:MFAloadProject2.png]] | | [[Image:MFAloadProject2.png]] |
− |
| |
− | To finish up press Ok.
| |
| | | |
| === Second step === | | === Second step === |
| | | |
| In Menu '''Plugins''' choose ''Plugins->MFA->Create Measured Values'' as shown in the following Figure. | | In Menu '''Plugins''' choose ''Plugins->MFA->Create Measured Values'' as shown in the following Figure. |
− |
| |
− | [[Image:MFACreateFluxMeasures1.png]]
| |
− |
| |
| A Dialog will pop-up asking the measured flux values. Enter the set of measured values or load a set of flux values from a file. | | A Dialog will pop-up asking the measured flux values. Enter the set of measured values or load a set of flux values from a file. |
− |
| |
− | [[Image:MFACreateFluxMeasures2.png]]
| |
| | | |
| The file has to respect the following format: | | The file has to respect the following format: |
Line 59: |
Line 27: |
| If the flux measured list is empty the following dialog will be shown. | | If the flux measured list is empty the following dialog will be shown. |
| | | |
− | [[Image:MFACreateFluxMeasures3.png]]
| + | === Third step === |
− | | |
− | === Third step a === | |
| | | |
| Enter the values displayed bellow. | | Enter the values displayed bellow. |
− |
| |
− | [[Image:MFACreateFluxMeasures4.png]]
| |
− |
| |
− | '''Note:''' to delete a flux value first select the desired flux value and press Enter. After erase the flux value by pressing backspace or delete (depending on the cursor position) and press Enter again.
| |
| | | |
| ==== Third step b ==== | | ==== Third step b ==== |
Line 73: |
Line 35: |
| In order to visualize the flux values click on the respective ''Flux Measures (Instance <Number>)'' object. In this example it is called ''Flux Measures (Instance 0)''. | | In order to visualize the flux values click on the respective ''Flux Measures (Instance <Number>)'' object. In this example it is called ''Flux Measures (Instance 0)''. |
| | | |
− | [[Image:MFACreateFluxMeasures5.png]]
| |
| | | |
| The flux measures can also be saved by pressing the "Save" button. | | The flux measures can also be saved by pressing the "Save" button. |
− |
| |
− | [[Image:MFACreateFluxMeasures6.png]]
| |
− |
| |
− | === Fourth step ===
| |
− |
| |
− | Afterwards, select the menu ''Plugins->MFA->MFA Wizard''.
| |
− |
| |
− | [[Image:MFAWizard1.png]]
| |
− |
| |
− | A wizard will pop-up. In the first step select the project, the model and respective flux measures.
| |
− |
| |
− | [[Image:MFAWizard2.png]]
| |
− |
| |
− | The second wizard step will show general information about the model as shown in the Figure below.
| |
− |
| |
− | [[Image:MFAWizard3.png]]
| |
− |
| |
− | The third wizard step will show a set of methods to solve the MFA(depending on the type of system) as displayed in the Figure below..
| |
− |
| |
− | [[Image:MFAWizard4aa.png]]
| |
− | <!-- [[Image:MFAWizard4a.png]] -->
| |
− |
| |
− | === Fourth step - FBA/Linear Programming ===
| |
− |
| |
− | Select the the desired flux to optimize and press Finish.
| |
− |
| |
− | [[Image:MFAWizard4af.png]]
| |
− |
| |
− | After select the MFA Solution datatype on the clipboard.
| |
− |
| |
− | [[Image:MFAWizard5a.png]]
| |
− |
| |
− | <!-- === Fourth step - Null space Method ===
| |
− |
| |
− | Select the null space method and press Finish.
| |
− |
| |
− | [[Image:MFAWizard4b.png]]
| |
− |
| |
− | After select the MFA Solution datatype on the clipboard.
| |
− |
| |
− | [[Image:MFAWizard6a.png]]
| |
− |
| |
− | -->
| |
− | === Fourth step - Tight Bounds ===
| |
− |
| |
− | Select tight Bounds and press Finish.
| |
− |
| |
− | [[Image:MFAWizard4cc.png]]
| |
− |
| |
− | After select the MFA Solution datatype on the clipboard.
| |
− |
| |
− | [[Image:MFAWizard7a.png]]
| |
− |
| |
− | === Determined and Over-determined cases ===
| |
− |
| |
− | These cases are analogous to the previous shown scenario. The following examples will use the model used in the under-determined scenario and some previously illustrated steps will be omitted.
| |
− |
| |
− | ==== Determined system example ====
| |
− |
| |
− | Create the following flux measures, as shown below.
| |
− |
| |
− | [[Image:MFACreateFluxMeasures4determined.png]]
| |
− |
| |
− | Execute the MFA Wizard and press next trough out the steps as shown in the Figures below.
| |
− |
| |
− | [[Image:MFAWizard1Determined.png]]
| |
− |
| |
− | [[Image:MFAWizard2Determined.png]]
| |
− |
| |
− | [[Image:MFAWizard3Determined.png]]
| |
− |
| |
− | After select the MFA Solution datatype on the clipboard.
| |
− |
| |
− | [[Image:MFASolutionDetermined.png]]
| |
− |
| |
− | ==== Over-determined system example ====
| |
− |
| |
− | Create the following flux measures, as shown below.
| |
− |
| |
− | [[Image:MFACreateFluxMeasures4overdetermined.png]]
| |
− |
| |
− | [[Image:MFAWizard2OverDetermined.png]]
| |
− |
| |
− | [[Image:MFAWizard3OverDetermined.png]]
| |
− |
| |
− | After select the MFA Solution datatype on the clipboard.
| |
− |
| |
− | [[Image:MFASolutionOverDetermined.png]]
| |