From Optflux
| Line 12: | Line 12: | ||
In Menu '''Plugins''' choose ''Plugins->MFA->Create Measured Values'' as shown in the following Figure. | In Menu '''Plugins''' choose ''Plugins->MFA->Create Measured Values'' as shown in the following Figure. | ||
| + | A Dialog will pop-up asking the measured flux values. Enter the set of measured values or load a set of flux values from a file. | ||
| + | |||
| + | The file has the following format: | ||
| + | <Reaction_ID> <Delimiter><Measured Value> | ||
| + | Note: The reaction order can be different from the model and any lines only with the Reaction_ID will be ignored. | ||
| + | |||
| + | |||
| + | === Third step | ||
Revision as of 16:24, 1 March 2010
MFA4OptFlux Plug-in How-to
In this section the MFA4Optflux How-to is described.
First step
Load a metabolic model, see How to create a new model/project from SBML and How to create a new model/project from text files.
In this how-to the following Metatool model will be used: Media:MFAmetatool.txt
Second step
In Menu Plugins choose Plugins->MFA->Create Measured Values as shown in the following Figure. A Dialog will pop-up asking the measured flux values. Enter the set of measured values or load a set of flux values from a file.
The file has the following format: <Reaction_ID> <Delimiter><Measured Value> Note: The reaction order can be different from the model and any lines only with the Reaction_ID will be ignored.
=== Third step