From Optflux
| Line 15: | Line 15: | ||
The file has the following format: | The file has the following format: | ||
| − | <Reaction_ID> <Delimiter><Measured Value> | + | |
| + | *<Reaction_ID> <Delimiter><Measured Value> | ||
| + | |||
Note: The reaction order can be different from the model and any lines only with the Reaction_ID will be ignored. | Note: The reaction order can be different from the model and any lines only with the Reaction_ID will be ignored. | ||
=== Third step | === Third step | ||
Revision as of 16:24, 1 March 2010
MFA4OptFlux Plug-in How-to
In this section the MFA4Optflux How-to is described.
First step
Load a metabolic model, see How to create a new model/project from SBML and How to create a new model/project from text files.
In this how-to the following Metatool model will be used: Media:MFAmetatool.txt
Second step
In Menu Plugins choose Plugins->MFA->Create Measured Values as shown in the following Figure. A Dialog will pop-up asking the measured flux values. Enter the set of measured values or load a set of flux values from a file.
The file has the following format:
*<Reaction_ID> <Delimiter><Measured Value>
Note: The reaction order can be different from the model and any lines only with the Reaction_ID will be ignored.
=== Third step